To clear ABS fault codes on a Rover 620, you typically need an OBD-II scanner or a dedicated diagnostic tool compatible with the vehicle. Connect the scanner to the OBD-II port, turn on the ignition without starting the engine, and follow the scanner's prompts to read and clear the codes. If you don’t have a scanner, disconnecting the vehicle's battery for a few minutes may also reset the ABS system, but this may not clear all codes or faults. Always ensure to address any underlying issues before clearing the codes.
That is illegal.
Did you ever find out where it is? As I am looking for the same thing... :)
For a Rover 620, the typical car stereo wiring color codes are as follows: Power (12V constant): Yellow Power (ignition): Red Ground: Black Front left speaker (+): White Front left speaker (-): White/Black Front right speaker (+): Grey Front right speaker (-): Grey/Black Rear left speaker (+): Green Rear left speaker (-): Green/Black Rear right speaker (+): Purple Rear right speaker (-): Purple/Black Always double-check with a wiring diagram specific to your model or consult a professional, as variations may exist.
The LG codes for the Stang ST-620 universal TV remote typically include 101, 102, 103, and 104. You may need to try each code to find the one that works with your specific LG TV model. Refer to the remote's instruction manual for the correct procedure to input these codes. If none of these work, consider checking the manufacturer's website for updated codes.
620
6% of 620= 6% * 620= 0.06 * 620= 37.2
12% of 620= 12% * 620= 0.12 * 620= 74.4
40% of 620= 40% * 620= 0.4 * 620= 248
25% of 620= 25% * 620= 0.25 * 620= 155
The answer is 620
Rounded to the nearest ten it is 620
Either the fuse if blown, the horn is defective, the horn switch is bad, or you have a wiring problem. Also make sure it is solidly grounded.