0
put a jack under the engine or trans where you want to check the mount. place it in an area where it's solid. then while jacking it up look for an area of the mount that seperates, the rubber part of the mount will show up as a crack or you will see shiney metal where it broke. while jacking it up if you are just moving the trans or engine it's not broken.a broken mount shows up on one or two clicks on the jack once you have some pressure on it. good luck paul g
What else can I help you with?
Are the engine mounts on a car hard to repair?
Engine mounts on a car are very difficult to repair and can cost thousands of dollars as the engine must be removed.
How much does it cost to diagnose check an engine light?
Take it to repair.
How do you remove engine transmission of Toyota Rav 4?
To remove the engine transmission from a Toyota RAV4, start by disconnecting the battery and draining the transmission fluid. Next, remove the necessary components such as the exhaust system, drive shafts, and any electrical connections to the transmission. Support the engine with a hoist, detach the transmission mounts, and then use a transmission jack to lower the transmission out of the vehicle. Ensure you follow safety protocols and consult a repair manual for specific steps related to your RAV4 model year.
engine or transmission service?
has this vehicle had any major repair
How do you change engine and transmission mounts on a 91 Dodge Spirit?
The question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
How do you repair a diagnostic trouble code of p0700 on a Chrysler PT Cruiser?
P0700 is EATX (transmission) code present. You need to have the transmission computer checked for codes to know what to diagnose.
What can a transmission repair do for you?
A transmission transfers power from the engine to the wheels. If your transmission needs to be repaired, you need to have this done in order to drive your car.
Where are the heater pipe and the upper torque strut mounts on a 94 Grand Prix 3.1 liter engine and how do you replace them?
The heater pipe is at the rear of the engine and the strut mounts are on each side of the engine compartment. These are not easy to repair and you need special tools and a front end alignment ' when you are through.
Can you reset the check engine light on a 1999 ford explorer?
After the Explorer is scanned for trouble codes to diagnose and then repair the malfunction , then the check engine light can be reset
Where are the motor mounts located on a 95 Nissan Quest?
On a 1995 Nissan Quest, the motor mounts are typically located at the front and rear of the engine, as well as on the sides. The front and rear mounts secure the engine to the vehicle's frame, while the side mounts help stabilize the engine and reduce vibration. Accessing them may require removing components such as the air intake or other parts in the engine bay for better visibility and space. It's advisable to consult a repair manual for specific details and procedures.
How many motor mounts do you need for 93 Lexus es300?
The 1993 Lexus ES300 typically requires three motor mounts: one engine mount, one transmission mount, and one rear mount. It's important to check the specific configuration of your vehicle, as variations may exist based on factors like engine type or modifications. Always consult a repair manual or a professional mechanic for the most accurate information.
How do you change a transmission in a Honda foreman 400?
the transmission is made together into the engine casing in most atvs. yours is no different. to change the transmission, you must change the complete engine assembley. if you are having problems with the transmission and it needs repair. you must tare down the complete engine and rebuild it.
