There are six numbers on stereo panel 1 2 3 4 5 6. to enter code only need first 4 number buttons. ( 1 2 3 4 normally used to change ch. ) if your code is eg 6745 first press 6 times using nimber 1 button 7 times using number 2 button 4 times for number 3 and 5 times for number 4. that's all. if your pannel says err you have to wait 1 hour yes 1 hour till the pannel display "code"
whats is the code car stereo on a 2001 Mercedes Benz 320
To enter the code for a Renault Megane stereo, first, turn on the ignition and the stereo. If the display shows "CODE," use the preset buttons (1-4) to input the four-digit code. Press the "OK" or "Enter" button to confirm the code. If entered correctly, the stereo will unlock and begin functioning normally.
If I remember, turn the stereo on, enter the code using the 6 preset buttons. After the beep, turn the stereo off. Then turn the stereo on and it should be OK. I just pulled my radio to get into the dash.
To clear the error 3 code on a 2001 Toyota 4Runner stereo, first, turn off the vehicle's ignition and disconnect the car battery for about 10-15 minutes. This will reset the stereo system. After reconnecting the battery, turn on the stereo and enter the correct security code if prompted. If the error persists, consult the owner's manual or consider professional assistance.
Try disconnecting from the battery the neutral cable for approx 11 minutes. Akhtar
It depends on which make and model you have.
First you need the code to enter. Check your owner's information for a business card with Anti-Theft Radio Identification Card at the top. There is a 5 digit code. Enter that using the number keys of your radio when you see "Code" on the digital screen of the stereo. If you don't have the code, you need to get it from a Honda dealership. You will need the system's serial number to get this.
I never knew there was a 2001 element!!!
i have a 2001 Saturn it has a dolby 8 NR stereo system please tell me the code to unlock it.
When you enter the security code wrong on a Citroen Saxo car stereo, it will display an error. If error 9 is displayed on your stereo, you have entered the wrong code nine times and your system is blocked. You will have to wait to enter the code correctly.
i'm pretty sure each stereo has it's own individual code but i have the same car and my code is 8271. hope it helps
To enter a stereo code on a 2006 Acura, first turn on the ignition and the radio. If the radio displays "CODE," use the preset buttons (1-6) to input the code. Press the appropriate button for each digit of the code, and then press the "AM/FM" or "Enter" button to confirm. If the code is correct, the radio will unlock and resume normal operation.