Locking mechanism controlled by the brake pedal has failed.
Shop will need to fix this one.
shifter control cable is probably come off @ linkage
Make sure the shifter handle is fully engaged in park. On my '92 caravan, I have to push the shifter up and forward again after putting it in park, to make sure it's fully in park. My ignition switch won't turn off all the way or door locks work until I do that. Also, you might have a loose shifter mechanism...jiggle it while turning the ignition switch at the same time.
The key lock, steering wheel and shifter are all designed to work together. Make sure the wheel isn't jammed and will not allow the release of the shifter when the key is on. Also, many cars have a device that locks the shifter until the brake pedal is depressed. Could also be damaged linkage or transmission.
Mill Ends Park was created in 1976.
Old Mill State Park was created in 1951.
Mill Bluff State Park was created in 1936.
McConnells Mill State Park was created in 1957.
To remove the shifter knob on a 2003 Mazda B-3000, first, ensure the vehicle is in park and the ignition is off. Look for a small set screw or a plastic cover at the base of the knob, which may need to be pried off gently. Use an appropriate tool, like an Allen wrench or screwdriver, to loosen the screw, and then pull the shifter knob straight up to detach it from the shifter lever. Be cautious not to damage any surrounding components during the removal process.
I don't know exact where the shifter is but try grabbing on to the stearing wheel and crank it to the right or the left until it locks into place then the key should come out.
mill park is in portland,oregon if u wanna hot boy like me ask me
The area of Spring Mill State Park is 5,495,631.0216192 square meters.
Mill Creek Park Suspension Bridge was created in 1895.