Never ever try to repair a starter!! DIY mechanics don't have access to the tools or parts required to repair them. take the old starter to a parts store and have it tested, if they find it to be bad, they can sell you a remanufactured one for around $140. Do this one right and save yourself a bunch of headache
Gdi
Where is the o2 sensor on a Mitsubishi pejero 1999, V6 GDI V75W
The Volvo V40 uses (among others) the 1.8 Mitsubishi GDI engine. GDI = Gasoline Direct Injection.
The icons on the dashboard of a Mitsubishi Pajero GDI usually referred to a possible problem. The engine icon means there is a problem with the engine.
To adjust the throttle on a Mitsubishi Lancer GDI, first ensure that the vehicle is turned off and the keys are removed. You may need to access the throttle body, which typically involves removing the air intake duct. Check for any signs of carbon buildup and clean if necessary, then adjust the throttle position sensor (TPS) if it's misaligned, ensuring it is calibrated to the manufacturer's specifications. Finally, reassemble any components and test the throttle response to ensure proper functionality.
Is your parking brake on?
dear queen
Yes.
Synthetic or Conventional is your choice. If you have no major engine oil leaks and the engine is in good condition then consider using a Quality Syntheticl If the engine leaks oil then have it fixed first. Till then I would recommend using Castrol GTX 5W-30.
The GDI ECO light on the dashboard of a Mitsubishi Pajero Io indicates the performance of the vehicle's gasoline direct injection (GDI) system. When the light is illuminated, it typically suggests that the engine is operating efficiently, promoting fuel economy. Conversely, if the light is flashing or remains on consistently, it may signal an issue with the GDI system that requires attention. It's advisable to consult the vehicle's manual or a mechanic if the light behaves unusually.
for best all round power and spark 0.8
The gdi unit is driven by a cam shaft the valve most likely turns fuel on and off I suspect the valve would be the place where the gas lines converge on the cylinder head