To fold down the back seats in a 2004 Isuzu Rodeo, locate the release lever or strap on the upper side of the seatback. Pull the lever or strap to unlock the seatback, then gently push it forward until it lies flat. Ensure that the seat is securely locked in place when returning it to the upright position. If necessary, consult the owner's manual for specific instructions or details.
It doesn't fold faward, you have to remove the bottom and undo a couple of bolts
The EGR valve on a 95 Isuzu Rodeo is located on the back top of the engine. It resembles a cylinder.
On a 2004 Isuzu Rodeo, cylinder 3 is located on the passenger side of the engine. The engine is configured in a V-shaped layout, with cylinders numbered from front to back. In this setup, cylinder 1 is at the front on the driver's side, making cylinder 3 the second cylinder from the front on the passenger side.
you have two seats in the front, and a bench seat in the back
It is on the oil pan towards the back.
Please show picture of how to put on belt
lol! On my 1997 Rodeo (v6, 3.2l) it is in the back -- the manifold must be removed to access it. lol! On my 1997 Rodeo (v6, 3.2l) it is in the back -- the manifold must be removed to access it.
Yes, the back seats in a 2004 Sunfire do fold down. There are straps on the back of the seats that are used to pull the seats down. The straps are assessable through the trunk of the car.
on the passenger side of the engine about midway back
The AC low pressure valve on a 1996 Isuzu Rodeo is located in the back of the engine compartment. The valve is on the larger of the two hoses that run from the evaporator to the compressor.
It is really easy. First take off the tailgate and the glass lift hatch. Then you are done.
You can find it about midways back under the vehicle, middle left hand side.