0
How do you get those plastic covers off the brake lights Honda Odyssey 2002 in order to replace the bulbs?
I just changed one today.
First, open the rear door and find the 2 panel screw covers along the edge of the light fixture.(The door actually covers them when it is closed.) Pop those open using a flat head screwdriver or something similar. Remove those two screws(they are Phillips heads) and then pull the whole light toward the rear of the vehicle. You will need to pull very hard to get them off since there is a clip on the side holding it to the rear fender. Once the whole fixture is pulled away from the fender,(be carefull not to pull so hard you pull all the wiring out in the process) remove the wiring clip by pinching it and pulling it out. Now find the bulb that is out by turning the plastic insert counter-clockwise and twisting them off. Pull the bulb directly out of the unit and push in the new one. Re-insert the bulb fixture and turn clockwise. (If you notice the plastic fixture is a triangular shape and will go in easier if you line it up correctly.) Replace the wiring clip and position the light to push it forward into the fender. Push snug toward the front of the vehicle. Now put the screws in and push the screw covers back into place.
What else can I help you with?
How do you replace break bulbs in 2001 beetle?
go in your trunk and there are covers where the brake lights are...remove covers, unscrew plastic nut, and remove light...
How do you fix the tail lights on a Honda Civic DX?
The taillight bulbs can be easily replaced on a Honda Civic. Open the trunk and locate the plastic covers. Remove the plastic cover and pull the bulbs. Replace with new bulbs and install the covers.
How do you replace rear lights on a 1999 Kia Sephia?
The taillights on a 1999 Kia Sephia are replaced through the cars trunk. Remove the plastic covers from the light housings and replace the bulbs.
How do you disassemble the rear brake light cover so you can replace the brake light bulb on an '03 Mazda Protege 5?
You have to go inside the trunk and remove the circular plastic covers from behind the lights. Then you have to unscrew the entire light and you can access the bulbs to replace them.
Where is the plastic black wing nut on rear lights on a Ford Fiesta mk6?
it is behind the lights, accessed from inside the boot, behind the side covers.
How do you replace tail lights in a 2005 Mercedes SLK?
open the trunk, remove the plastic cover assy, remove the required bulb, 1/2 turn and replace same. Replace plastic cover, by pushing the plastic rivits stright in.
How do you change the backup lights in a 1989 Buick Lesabre?
The plastic covers can be popped out with a screwdriver or other flat object. Be careful not to break the plastic tabs that hold them in!
How do you replace fog lights on a 2000 Mazda Millenia?
TAKE THE COVERS OFF THAT COVER THE FOG LIGHTS BY PULLING THEM OUT.gET A SREW DRIVER AND TAKE THEM OUT THATS IT.
How to replace tail light covers for 1999 Dodge Durango?
open the trunk and there should be a couple screws where the lights are.
Can cluster lights be changed?
I'm unsure of if you mean individually or the entire light. The clear plastic covers seal can be broken off, and then the internals modified. You then would have to use clear sealant to replace the cover. If you mean the entire light, definetly possible.
How do you change brake light bulb on 1999 Honda Passport?
To change the brake light bulb on a 1999 Honda Passport find the light housing located in the trunk. Find the plastic covers for the lights and remove them. Pull the bulbs out carefully and replace them.
How do you change license plate lights in a 1997 Toyota Celica?
There are plastic bulb covers on either side of the license plate. Unscrew the screws and take the covers off. From there you can insert new bulbs.
