The starter is located under the intake manifold of the engine so a real pain to do, the top of the engine has to be removed in order to get at the starter, big job and costly.
Passenger side back by the bulkhead.
install starter motor
I believe it is under the intake manifold.
I am sorry to be the bearer of bad news but to replace the starter you must remove the intake manifold since the starter is underneath the manifold. You had better know what you are doing for this job. I think it costs between $800 and $1500 to get this done. vbd
To change the parking light bulb on a 1998 Lexus SC400, first, open the hood and locate the back of the headlight assembly. Remove the cover or twist the socket counterclockwise to access the bulb. Carefully pull out the old bulb and replace it with a new one, ensuring it's securely seated. Finally, reassemble the socket or cover and test the new bulb to ensure it works properly.
very hard
Really not a good idea unless you have a transmission malfunction. Check/change your transmission filter, and add a few quarts of Toyota ATF-III.
Installing a starter on your 1998 Nissan will take approximately one hour. Removing and installing a starter is a very simple process.
first start by removeing the battery and air cleaner assembly and the you will have access to the starter. then remove the 2 14m bolts that hold in the starter and remove and replaced reinstall all parts and your done.
Remove the positive cable from your 1998 Chevy Cavalier battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Std. Transmission?
Yes, you can. I just had one installed at mockey shorr.