you need to disconnect the hoses above the fuel rails, remove the air instake hose, remove those filters on the hoses, remove the fuel lines off the fuel rails, pull the fuel rails up not sideways you may brake the injectors! the injectors do not screw on they just pop in and out of the fuel rail and engine block...pretty simple id be glad to do it for anyone free if your around elizabethtown ky, i have a ls400 1991 and i know these cars pretty well!
how do you replace the fuel injectors on a 1991 subaru legacy
How do change Fuel injectors on GS300 2000
To replace the fuel injectors on a 1991 Nissan Stanza, first disconnect the negative battery terminal and relieve the fuel system pressure by removing the fuel pump fuse and running the engine until it stalls. Next, remove the intake manifold and fuel rail to access the injectors. Carefully remove the old injectors from the fuel rail, apply a small amount of engine oil to the O-rings of the new injectors, and install them. Finally, reassemble the fuel rail, intake manifold, reconnect the battery, and check for leaks before starting the engine.
On a Lexus LS 400, the fuel injectors are located on the engine's intake manifold, specifically within the cylinder heads. To access them, the intake manifold usually needs to be removed, as the injectors are inserted directly into the engine's intake ports. This positioning allows them to efficiently deliver fuel into the combustion chamber.
Cleaning the fuel injectors is a good start.
67 chevelle's never had fuel injectors, they had a carburetor.
Fuel filter, fuel pump, or pressure bypass/relief valve is not providing the correct, enough fuel pressure at the injectors.
Carefully
When all fuel injectors are stuck open, this generally means that the injectors are not getting the right voltage. You will need to not only check the voltage, but make sure the injectors are receiving the right signal.
take fuel rail off unplug injectors from wiring harness pull out injectors make sure you get all the rubber o rings out of the intake manifold and fuel rail reverse for install
To install fuel injectors on a 1992 Mazda Miata, start by disconnecting the negative battery terminal and relieving the fuel pressure by removing the fuel pump fuse and running the engine until it stalls. Next, remove the intake manifold and disconnect the fuel rail from the injectors. Carefully pull out the old injectors from the fuel rail and replace them with new ones, ensuring O-rings are lubricated. Finally, reassemble everything, reconnect the battery, and check for leaks before starting the engine.
behind right headlight