On the passenger side in the back seat, push the seat forward you will then find a crank
handle. Open the crank as it is folded. You will find a slot put the crank in the slot and turn the crank until it stops. You will then find the spare tire on the ground under the trunk portion of the car. You can turn the bolt on the chain and you can remove the spare tire.
No, the order doesn't matter,
To remove the spare tire from an Infiniti QX56, first, locate the spare tire tool kit in the vehicle, typically stored in the trunk or under the floor mat. Use the jack handle to lower the spare tire from its mounting by inserting it into the designated hole and turning it counterclockwise until the tire drops to the ground. Once lowered, you can unhook the tire from the retaining mechanism and remove it. Always consult your owner's manual for specific instructions related to your model year.
To remove the spare tire from a 2001 Nissan Xterra, first locate the spare tire release mechanism under the rear of the vehicle. Use the provided tool (often found in the trunk) to lower the spare tire by inserting it into the slot and turning it counterclockwise. Once the tire is lowered to the ground, you can unhook the tire from the bracket and remove it. Always ensure the vehicle is on a stable surface and the parking brake is engaged before attempting this.
behind spare tire on gas tank
The fuel filter is located in front of the spare tire, easily reachable once you remove the spare tire. Tools to remove the spare tire are located under the carpet under the back seat.
Does a Citroen berlingo Roma home 2001 have a spare tire
To lower the spare tire on a 2003 Toyota Sequoia, locate the spare tire winch access hole in the rear cargo area. Insert the tire tool into the hole and turn it counterclockwise to lower the tire. Ensure you have the spare tire's retaining nut securely in place to avoid losing it while lowering. Once the tire is lowered to the ground, you can easily remove it from the winch.
To lower the spare tire on a Pontiac Montana, first, locate the spare tire tool, which is usually found in the rear storage area. Remove the cover or access panel to expose the spare tire mechanism. Insert the tool into the access hole and turn it counterclockwise to lower the tire until it reaches the ground. Once lowered, you can remove the tire from the vehicle.
To lower the spare tire you need to some tools and a jack. There is a cable winch holding the spare in place, so you will have to loosen it using your tools.
There is a small hole on the outside edge beneath the carpeted area. Just look along the frame for a small hole, just left a a bit of center. You have to put the tire tool handle into this and crank it down, this will lower the spare from underneath. Hope this helps.
To lower the spare tire on a 2004 Yukon Denali, first locate the spare tire hoist mechanism, which is typically found under the rear of the vehicle. Use the provided tire iron or a similar tool to insert into the hoist access hole, usually found in the rear cargo area. Turn the tool counterclockwise to lower the spare tire until it is fully released from its holder. Once lowered, you can retrieve the spare tire for use.
can I move my spare tire thats on the back of 1998 pathfinder to under the vehicle