With a small flat head screw driver, insert the blade between the lens and the molding, just to the side of the hinge. You will be able to pry it out. You will need to do it on both sides to pop the hinges out. The hinges are a simple "horse-shoe" shape and a pin.
Open the tub of the turn signal housing and uncrew the 2 scews holding it and pull out the whole housing .
Most likely the fuse is blown for the dome light on the Silverado if the light doesn't come on.
If you push that button, the dome light inside of the truck won't come on when you open the door.
the dome light bulb can be burnt out or the door pins are sticking. check it out.
To change a brake light on a 1995 Honda Odyssey, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the assembly, then gently pull it out to access the bulb sockets. Twist the socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble the tail light by reversing the steps. Finally, test the new bulb to ensure it is functioning properly.
check the dome lamp override switch
The dome light has a switch that has an off position. Any other lights you can simply remove the bulbs.
To replace the inner tail light assembly of a 2004 Honda Odyssey, first, open the rear hatch and locate the access panel on the side of the tail light. Remove the screws or clips holding the panel in place, then disconnect the electrical connector from the tail light assembly. Next, unscrew the tail light assembly from the vehicle and carefully pull it out. Finally, insert the new assembly, reconnect the electrical connector, secure it with screws, and replace the access panel.
Yes, the dome light in a 2010 PT Cruiser typically comes on when you open the doors. This feature is designed to provide visibility inside the vehicle when entering or exiting. If the dome light does not illuminate, it could indicate a blown fuse or a malfunction in the door switch.
your dome light is set in the on psition it will stay on all the time. you can set it to door open mode and it'll turn on when the doors are open or you could have it off all the time. your dome light is set in the on psition it will stay on all the time. you can set it to door open mode and it'll turn on when the doors are open or you could have it off all the time.
The dome light switch has 3 positions. Off-On-On when the door is opened. Put it in the proper position.
problem with dome light sometimes working when door is open and some time it does not .i would like to know where the doom light moduel is located