Our mechanic had to climb through the inside of the car, into the trunk area and open it by removing the hatch cover. That's the only way he could replace the latch.
To repair a broken glove box latch on a VW Cabrio, first, remove the glove box by unscrewing any screws and detaching it from the dashboard. Inspect the latch mechanism for any broken parts or obstructions; if necessary, replace the latch assembly with a new one. Reassemble the glove box by securing it back in place and testing the latch to ensure it functions properly. If the latch is simply misaligned, adjusting its position may suffice without needing a replacement.
If the plastic part is broken, it can not be repaired. New latch is about $ 50.00.
It is very easy to repair a broken glove box latch. Once you've acquired the part, you will need to take the inner and outer panels of the door apart. The latch is attached to the outer panel of the door. It can be removed with a couple of screws.
Replace any broken parts or adjust latch assembly
Open the glove box and you should see a single screw on the back of the latch. Simply unscrew this and the latch should come out.
Remove the three Philips screws along the top and the two on the bottom corners and remove the entire glove box. You can then work on the latch from the back of the latch and easily open the glove compartment by gently prying off the corners of the glove box from the locking pins.
To open the glove compartment on a 2002 BMW X5, locate the glove box latch, which is typically found on the front of the glove box door. Press the latch or pull it towards you to release the door. If the glove box is stuck, ensure there are no obstructions inside and try gently pulling it while pressing the latch. If the latch is broken or malfunctioning, you may need to consult a professional for repairs.
Yes it works great! Have taken two kids through all those years
If the handle is broken, then you'll have to manually open it. If the locking mechanism is frozen, you will have to manually open it. Generally that means pulling the back panel off and pulling the latch cables by hand. Sequoia forums have detailed information on how to remove the rear panel - fairly simple.
The hood latch on a Toyota Sequoia is typically located near the center of the front grille, just above the bumper. To release it, pull the hood release lever inside the cabin, usually found on the driver's side near the footwell. Once you pull the lever, go to the front of the vehicle and feel for the secondary latch under the hood, which you need to lift to fully open the hood.
To fix a broken trunk latch on a 1994 Toyota Tercel, start by accessing the latch mechanism, which may require removing the interior trim panel in the trunk. Inspect the latch for any broken components or obstructions. If the latch is damaged, you may need to replace it with a new or used part. Reassemble the trim panel and test the latch to ensure it operates smoothly.