0
What else can I help you with?
Where is the Gas cap release on Mitsubishi 2011 galant?
if your talking about the gas-tank fill door-the release lever is located just above the trunk release lever (on most models with interior fill-door release). it is marked with a "gas pump with hose".
How do you remove a freeze plug from a 1997 Mitsubishi Galant?
I assume it is leaking or you would not be removing it. You can remove it by driving a screwdriver into the middle and prying sideways. hit it on one side so that it flips sideways but hopefully not right into the cooling jacket, then grip the exposed edge and lever it out with pliers.
How do you fix windshield wiper lever on a Mitsubishi Galant GTZ 1999 the lever doesn't retract anymore it stays in spray mode but doesn't spray wiper fluid?
Go to NAPA Auto Parts and ask them to order a new switch. They can be sure to help you find the correct part. Their website says they run around $44 for a new one. Or check your local import parts salvage yard for a Galant of your vintage and pull it there. (be sure it works or you may end up with TWO broken windshield wiper levers haha)
How do you remove the windshield wipers from a 2002 Mitsubishi?
There is either a nut under a cap on the arm that is holding it on, or a lock lever that you need to pull or push on under the arm, or it is just stuck, and you might need to spray it with something to loosen it from being rusted.
How can the mechanical advantage of a lever be increased?
The mechanical advantage of a lever can be increased by either increasing the length of the lever or by changing the position of the fulcrum closer to the load.
What is the fixed point on lever called?
Its called a fulcrum. Thank you.
Where is the brake light switch at on a 1996 galant?
I think this switch which is adjustable is located above the brake pedal on a braket with a locknut. May be the bump rubber on the pedal lever is broken.
What class of lever is a saw?
ok so this is what i think i dont think a saw is a lever because dont levers need to have a fulcrum in order to be considered a lever.But on the other hand i read that a knife is a lever and it doesnt even look anything like a lever so my answer might be wrong.
The fixed balance point on a lever?
The fixed balance point on a lever is called the fulcrum. It is the point at which the lever pivots or rotates when a force is applied to either side of the lever. The position of the fulcrum determines how the lever amplifies or redirects the force applied to it.
What is the point that a lever turns around called?
The point that a lever turns around is called the fulcrum. It is the pivot point around which the lever rotates to either lift or move an object.
What is the lever in a tap?
The lever in a tap is the handle that is used to control the flow of water. When the lever is moved, it either opens or closes the internal valve mechanism to allow water to flow or stop.
What is the fixed point on a lever that does not move?
The fulcrum is the fixed part of a lever. (the pivot point)
