There should a programming guide in the users manual
Keyless entry remotes must be programmed by a Hyundai dealer.
How program my keyless entry remotes for 2003 chevy malibu
I found an Internet site which says how to program the keyless entry remote. But there is an error: this procedure is good for Elantra 2001 to 2003. Elantra 2004 must be programmed by the dealer. http://car.justanswer.com/hyundai/n1kw-program-remote-entry-hyundai-2004
Dealer or Locksmith! Must use scantool...
25 - 50 bucks at the dealer
No, keyless entry was an extra-cost option.
There are many websites online that sell keyless entry remotes. There is currently a Ford keyless entry remote on Ebay for $15.95. They are not very expensive.
how do you program keyless entry remote 98 GMC
How do you program the keyless entry on a 2005 Ford E350 Van?
To program a keyless entry remote for a 2005 Hyundai Elantra, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine, then back to "Off" five times within 10 seconds. On the sixth turn, leave it in the "On" position; the door locks should cycle to indicate programming mode. Press any button on the remote you wish to program, and the locks will cycle again to confirm successful programming. Repeat this step for any additional remotes, then turn the ignition to "Off" to exit programming mode.
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
Not with the keyless entry pad or remotes - unlock your drivers door using your key That's what I had to do on my 1995 Ford Explorer when the battery had a dead cell and there was no power