0
Locate the Data Port under drivers side dashboard usually located to the right of steering column.
Insert keys in ignition and leave in the OFF position.
Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port terminals 1 and 4 with a suitable jumper wire, leave the jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
Within 10 seconds after connecting the jumper wire, press the Hazard Switch 6 times. Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.
Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
Repeat step 5 with up to 4 remotes (including any existing remotes) within one minute. After completing each programming, the doors will lock and unlock once.
Disconnect the programming wire and remove the keys from the ignition.. Locate the Data Port under drivers side dashboard usually located to the right of steering column.
Insert keys in ignition and leave in the OFF position.
Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port terminals 1 and 4 with a suitable jumper wire, leave the jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
Within 10 seconds after connecting the jumper wire, press the Hazard Switch 6 times. Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.
Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
Repeat step 5 with up to 4 remotes (including any existing remotes) within one minute. After completing each programming, the doors will lock and unlock once.
Disconnect the programming wire and remove the keys from the ignition..
What else can I help you with?
What does the green key light on a Mitsubishi eclipse spyder mean?
i THINK IT MEANS THE CHIP IN YOUR KEY HAS BEEN DE-ACTIVATED. I'M TRYING TO RESEARCH HOW TO RE-ACTIVATE IT...
How do you reset 2004 Mitsubishi eclipse alarm?
get the black wire and then the red wire and then pull the chip out of it and take the key and unlocked the dricer door
How do you open a locked Mitsubishi eclipse?
with a key
How do you program a new Mitsubishi colt key?
how to program a new key 2008 mitsubishi colt
Does a 2000 Mitsubishi have a chip in key?
If it has a cover on the key, yes. If it is a steel key no.
What does the chip key transpond to in a 2000 eclipse?
The immobilizer.
How do you program a blank key for Mitsubishi endeavor 2006?
You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.
How do you program a key chip for a Mitsubishi endeavor 2006?
To program a key chip for a 2006 Mitsubishi Endeavor, you'll typically need the vehicle's key programming tool or a compatible OBD-II scanner with key programming capability. Insert the existing key into the ignition and turn it to the "On" position without starting the engine. Follow the specific instructions for your programming tool to add the new key, which usually involves cycling through the ignition with the new key several times. If you don't have access to the necessary tools, it may be best to consult a professional locksmith or a Mitsubishi dealership for assistance.
Where is the cheapest Chip key for a 2002 Eclipse?
Keylessride.com price is $18.99
How do you programming key less entry Mitsubishi veranda model 2002?
How to program a Mitsubishi veranda KE key less clicker
How do you program a key for a 2001 Chrysler Sebring coupe?
The dealer scan tool is required to program a key on this Mitsubishi built car.
How do you program a dodge stratus transponder chip key?
Go to your Chrysler dealer and ask them to program it.
