This works on 2004 Toyota Camry as well.
Start with the key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don't matter).
Perform these steps within 5 seconds
Insert the key into the ignition (don't turn it) Pull key out
Insert the key into the ignition (don't turn it) Pull key out
Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition (don't turn it) and pull it out.
Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition and leave in the ignition.
Close the drivers door
Turn the ignition to ON (as far as you can go without cranking the engine), then back to off .
Remove the key from the ignition.
Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
Perform these steps within 40 seconds
Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds
Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.
Open drivers door
You have to have the dealership program a key less entry remote for 2011 Toyota Camry.
I can't add it
That depends on kind of key you have. Smart keys need TIS Toyota software and special cable also activation for key replacement.
http://www.automotivehelper.com/topic360771.htm
Check your owners manual. If you don't have one check related link below. You may have to register as a Toyota owner / exc. to be able to get access. Hope this helps
The keyless remote receiver on a 2004 Toyota Camry is typically located in the interior of the vehicle, often near the front overhead console or under the dashboard. It may also be integrated with the vehicle's body control module. For precise location and access, consulting the vehicle’s service manual or a repair guide is advisable.
Some of it does but not all models.
remote receiver
To program a keyless remote for a 2003 Toyota Camry, start by sitting in the driver's seat and closing all the doors. Insert the key into the ignition and turn it to the "On" position (do not start the engine) and then back to "Off" five times within 15 seconds. After the fifth turn, the door locks should cycle to indicate that the vehicle is in programming mode. Press any button on the remote within 30 seconds, and the locks will cycle again to confirm successful programming.
Read the owners manual if you have it. There are many web sites that sell replacement remotes. I just purchased one for my 2004. Toyota $130. Web site $39.95. Any supplier should be able to tell you if your Camry came with the remote door opening feature.
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
how to program 2012 toyota fortuner