0
1. Move the driver's seat forward, and locate the security system control unit mounted on the underneath the seat.
2. Turn on ignition switch on.
3. Press and hold the green programming button on the control unit with a pen. you will have to poke through a hole about the size of a pencil located on the side of the unit. when the security system LED on the instrument panel comes on, release the program button, (Step 3 and 4 must be done within 5 seconds of each other.)
4. Press and release the top button on the transmitter, check that the LED goes out chirps once, and the front marker lights flash to confirm that the transmitter's code worked by the control unit.
5. if you have other transmitters to program, repeat steps 3 and 4.
6. Turn the ignition switch off to exit the programming mode.
What else can I help you with?
Where is the fuel filter located in a 1997 Isuzu Rodeo?
Where is my filter for my 97 ISUZU RODEO
1997 Isuzu Rodeo V-6 Starter Solenoid Removal what is the Procedure?
How to remove the starter from a 1997 Isuzu Rodeo 4X4 automatic
How do you replace the shocks on a 1997 Isuzu Rodeo?
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
What is the oil filter in an Isuzu rodeo?
On a 1997 Isuzu Rodeo, the oil filter is located on the bottom front of the motor beneath the fan.
What type of automatic transmission fluid is used for a 1997 Isuzu Rodeo?
what type of transmission fluid used for a 97 Isuzu rodeo
How do you add transmission fluid in 1997 Isuzu rodeo?
In my 93 Isuzu Rodeo you have to add your transmission fluid buy poring it into the the transmission fluid dipstick.
Crankshaft sensor 1997 Isuzu Rodeo?
on the right side of the engine
Can a 1997 Isuzu Rodeo grill fit a 1999 Isuzu Rodeo?
Yes, a 1997 Isuzu Rodeo grill can fit a 1999 Isuzu Rodeo, as both models share similar body styles and dimensions. However, it's always advisable to verify specific part numbers or consult with an auto parts specialist to ensure compatibility, as there may be minor differences in mounting points or design elements.
How many tons does a 1997 Isuzu Rodeo weigh?
A 1997 Isuzu Rodeo typically weighs between 3,200 and 3,500 pounds, depending on the specific model and options. This translates to approximately 1.6 to 1.75 tons.
Why do the dash warning lights come on at idle on a 1997 Isuzu Rodeo?
Which lights?
Do you need a new gasket when replacing the thermostat on a 1997 Isuzu rodeo?
yes
How do you replace the clutch slave cylinder on a 1997 Isuzu Rodeo?
take the cap off and roll another rodeo under it
