0
STEPS:
1. Begin by sitting in the driver seat with all the doors shut.
2. Insert your working master (black) key in the ignition.
3. Very Quickly, turn the key from "LOCK" to "ON" 5 times. (You will end with the key in the "LOCK" position)
4. Immediately, open and close the driver door 6 times very quickly. (End with the door closed)
5. Immediately, remove your working Master Key and insert your new Master Key
6. Turn the key to the "ON" position and leave it there while you wait for 1 minute.
7. After the minute, if you want to program another key, just remove the first one and insert the next one, turning it to "ON" and leaving it in position for 1 minute.
8. When you are through programming keys, just take the last one out, open and then close the driver door to lock in the programming, and your done
Programming Sub Keys (Grey) is done the same way except you turn the master key 4 times before you open and close the door 5 times. Then insert the sub key, turn to the "ON" position, and wait your minute. Finish by removing the key and opening and closing the door 1 time as before.
What else can I help you with?
How do you program Toyota immobilizer key?
how do you program key
How do you disarm a 1997 Toyota 4Runner factory Alarm?
To disarm a 1997 Toyota 4Runner factory alarm, place the key in the ignition. Turn the key about halfway ensuring the car does not start. Leave the key in that position for 10 to 15 minutes and start the car.
How do you program 2006 Toyota 4 runner transponder key?
To program a transponder key for a 2006 Toyota 4Runner, you'll need two working keys. Insert the first key into the ignition and turn it to the "On" position without starting the engine. After about 15 seconds, turn the key back to "Off," remove it, and insert the second key, repeating the process. This will program the new key, and you should hear the locks cycle to confirm successful programming. If you don't have two keys, you may need to visit a dealership or a locksmith for assistance.
How do you program a Toyota Rav4 transponder key?
To program a Toyota rav4 tansponder Key one must go to settings. Once in settings there is a programming button that will allow you to program the key.
How do you reset the maintenance warning light on a 2003 Toyota 4runner?
on the upper left side of the guages there is a button labeled "reset". with the key off hold the button in, then turn the key on. the light should flash for a few seconds then turn off.
How do you program a spare key for 2005 Toyota Camry?
Ask Toyota to give you a spare key.
How do you program a key less entry remote for Toyota Camry 2011?
You have to have the dealership program a key less entry remote for 2011 Toyota Camry.
How do you program key lass Toyota landcruiser Sahara?
my toyota key has been lost now how can i start my toyota land cruiser 2011 without key
How do you program 2003 key switch?
program new keyswitch for 2003 odyssey
How do you program a transponder key for a 2007 Toyota Camry?
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
How do you Program a Toyota matrix key?
dealer only
How do you program the transponder key in 2012 Camry?
how to program 2012 toyota fortuner
