0
1. Open the car door, then turn ON and OFF the ignition switch for 3 times, don't take out the key.
2. Close door then open it, repeat for 3 times, the door lock should activate, and system enter learning status.
3. Press any button on the remoter, the door lock should activate.
4. Remove the key, the car door should activate again, and the remoter programming successful.
Also you could use SKP-100 or SKP-900 OBD2 Key programmer for it.
http://www.ecutool.com/productshow.asp?id=11272&cso=autoshop
Also could contact me for more details about key programming technicals
Skype: llifang2012
What else can I help you with?
How do you program the remote key fob on a 2005 Chevy Malibu maxx with remote start?
How do you program the remote key fob on a 2005 Chevy Malibu maxx
Can a Mazda 3 keyless entry remote be programed for a Mazda 6?
yes. your local Mazda dealer can program them for you. if they say it cant be done; theyre lieing to get you to pay for another key fob. the systems are the same the key fob may "look" different.
How do you program a Mazda Millenia key less remote?
How do I re-program a remote for a 1997 mazda millinea?
How do i Program fob key?
how do i program keyless remote for 2000 Buick LeSabre
How do you program the remote key fob on a 2001 Chevy Malibu?
You will need to contact a dealership to program the remote key FOB on a 2001 Chevy Malibu. Stock remotes can only be programmed at Chevy dealerships.
How do you program a remote key fob for a 2005 Buick terraza?
Take it to your Buick dealer is how.
How do you program a key fob on a Mazda protoge 5?
Take all keys to dealership service dept.
How do you program the remote key fob on a 2005 gmc canyon?
To program the remote key fob for a 2005 GMC Canyon, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the key fob simultaneously for about 15 seconds. Then, release both buttons and press the "Lock" button once to finalize programming. Repeat this process for any additional fobs you wish to program.
How do you program nats remote key fob on a Nissan Navara D21?
To program a NATS remote key fob for a Nissan Navara D21, first, ensure you have all existing keys and the new fob. Insert the key into the ignition and turn it to the "On" position without starting the engine. Within 5 seconds, press the "Lock" button on the new fob; you should hear a confirmation sound from the vehicle. Repeat this step for each additional fob you wish to program, then turn off the ignition to complete the process.
Our services:?
Remote key fob repair Remote key fob replacement Transponder key programming Rekey Service New locks Installation
How do you program the Mazda 6 key fob to open the trunk?
To program the Mazda 6 key fob to open the trunk, first, sit in the driver's seat with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the trunk release button on the key fob for a few seconds until you hear a confirmation sound. Turn the ignition back to the "Off" position to complete the programming.
How do you program a Mazda B2500 key fob?
To program a Mazda B2500 key fob, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and back to "Off" five times within 10 seconds. After the fifth turn, leave the key in the "On" position, and the doors should lock and unlock to indicate programming mode. Press any button on the key fob within 30 seconds to program it, and then turn the ignition off to exit programming mode.
