How do you program visor garage door opener on 2003 Nissan Altima?

Answer 1

To program the visor garage door opener (HomeLink) on a 2003 Nissan Altima, start by turning the ignition to the "ON" position. The engine doesn’t need to be running, but the key must be on. If you’re programming it for the first time or want to clear old settings, press and hold the two outer HomeLink buttons on the visor until the indicator light flashes rapidly—this takes about 20 seconds. Release the buttons once the light blinks fast.

Next, hold your garage door remote 1 to 3 inches from the HomeLink panel. Simultaneously press and hold both the remote button and the HomeLink button you want to program. Continue holding until the HomeLink indicator light switches from a slow blink to a rapid blink, which may take up to 30 seconds. Once it does, release both buttons. This programs the HomeLink button.

If your garage door opener uses a rolling code system (most do if made after 1996), you’ll need to complete one more step. Go to the garage door opener motor (mounted in the garage) and press the “Learn” or “Smart” button on it. You now have 30 seconds to return to your vehicle. Press the newly programmed HomeLink button up to three times, holding it for a few seconds each time, until the door responds.

Once your garage door opens or closes using the HomeLink button, the programming is complete.

Answer 2

2003 nissan altima visor garage door opener progarming