Actually on my 2003 Hyundai Sonata gls i had the same problem...there is a manufactuer alarm that should set off when u put the key in and turn.. do that one more time(BUT makng sure alrm goes off then do it again) then don't take the key out turn offthen set it in the acc. position in the ignition after the alarm goes off then wait about 5 to 10 min and turn on by then it should have reprogramed and kick on..the third time is when you should be waiting for the programming to be down...its very very important that you do the programming on the third time...because the computers are built in the car and not built like most other American made cars....
To reprogram a 2009 Hyundai Sonata key fob, first, sit in the car and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" button on the key fob for about 5-10 seconds, then turn the ignition off. Finally, test the key fob to ensure it’s working properly. If this method doesn't work, consult your owner's manual or a professional locksmith for assistance.
No
what answer!
To activate the security alarm on a Hyundai Sonata, ensure all doors are closed and locked. Use the key fob to lock the doors; the alarm will be activated automatically within a few seconds. If you prefer, you can also manually lock the doors using the door lock switch inside the car, which will trigger the alarm system. To deactivate the alarm, simply unlock the doors using the key fob or the key.
You normally do not have to reprogram the key when you replace the battery. If you do you will have to contact your VW dealer.
You'll probably need to have this done at a dealership.
To reprogram a key fob for your Hyundai Tiburon, start by sitting in the driver's seat with the doors closed. Insert your key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this process within 10 seconds, turning the key to "On" and then "Off" a total of five times. After the fifth time, you should hear a chime indicating that the vehicle is in programming mode; then press any button on the key fob to complete the programming.
2006 jetta tdi both key remote not working
the bastards at the dealership have to do it...had it done, not cheap.
Take it to your dealership they would be the one to help you with that.
your key fob can only be programed by the local gm dealer.
To reprogram a Lexus RX300 key fob, first, sit in the vehicle and close all doors. Insert the key into the ignition and turn it to the "ON" position without starting the engine, then turn it back to "OFF." Repeat this process twice, then turn the ignition back to "ON" a final time. Press and hold the "lock" button on the key fob for a few seconds, and this should reprogram the fob. If this doesn't work, consult the owner's manual or a professional locksmith for assistance.