You will need a set of a/c gauges, a vacuum pump, freon and oil....... Put the gauges on both the low and high side ports (blue goes to the low side and red goes to the high side and yellow will go to the vacuum pump).... Vacuum the system down for about 1 hour and then let it sit for 1 hour to see if it will at least hold a vacuum and if so then vacuum it out for an additional 1 hour and then recharge it. Add your freon and oil at a slow pace and watch the gauge readings. Depending the outside temperature you will what the high side to be between 200 to 250psi and the low side to be between 30 to 40psi.
How do you disconnect the Data Port when setting the timing on a 1993 Toyota Corolla?
What is the radio unlock code for a 1993 toyota corolla
1993 on Toyota corolla vacuum hose
Wiring diagrams for the 1993 Toyota Ceres Corolla can be gotten from your local Toyota dealership. Another option is a Haynes Toyota repair manual.
not without MAJOR modification
The 1993 Toyota Corolla had 110 horsepower. To achieve the Corollas maximum horsepower you would need to be moving at 5,600 rpms.
The curb weight of a 1993 Toyota Corolla is just over 2,300 pounds. The Toyota Corolla also has the lightest weight motor of other cars for its size.
Carefully
On the net
1992
The 1993-2001 Toyota Corolla takes 20" driver side and 18" passenger side replacement windshield wiper blades on the front.
If your 1993 Toyota Corolla is blowing hot air, it might have a refrigerant leak in the cooling system. You can try replacing the refrigerant with a kit found at most auto parts stores, but if the leak is large, this fix will not last long. You might also have a compressor failure.