how to remove a water pump on a 95 infiniti g20
how to replace a water pump for a infiniti g20
remove timing chain
the water pump is located on the left side of the engine mid way down. remove the belt and then the pully. the pump is located behind of the pully. there is not much room and it is not easy to replace,
To replace the water pump on a 1996 Infiniti G20, first, disconnect the battery and drain the coolant. Remove the serpentine belt, then take off the timing cover to access the water pump. Remove the old pump by unbolting it and clean the mounting surface before installing the new pump with a new gasket. Reassemble everything in reverse order, refill the coolant, and check for leaks.
I can't find the starter a 1996 Infinity G20?
How do I remove the front door panels on a 1996 Infiniti G-20. I am trying to install new speakers
Check out G20.net
To remove the power steering pump from a 1995 Chevy G20, first, disconnect the negative battery cable and relieve the pressure in the power steering system. Then, remove the serpentine belt from the pump by loosening the tensioner. Next, disconnect the fluid lines from the pump and unbolt it from the engine bracket. Finally, lift the pump out of its mounting position.
The water pump is behind the pulley of the cooling fan---quite large and heavey
do you have avideo
Go to G20.net and ye shall find ;)
I believe '91-'94 are compatible.