use an oil filter remover, i find the strap type that uses a ratchet works best, the chain type distroys the filter and you get oil everywhere
How do i remove a stuck Cd from my 2005 Toyota Highlander? The CDs will not eject.
You can open a stuck hood by removing the hood latch. The hood latch can be access through the front grill. Remove the code latch retaining bolts. The hood should be free to open.
This is a blown brake fuse check your break fuse and should fix it.
To remove the seat belt from a Toyota Tacoma, first, locate the bolt that secures the seat belt buckle or retractor to the vehicle's floor or pillar. Use a socket wrench to remove the bolt and detach the seat belt. If the seat belt is stuck, ensure that the seat is in the proper position and check for any obstructions. After removing the old seat belt, replace it with a new one by reversing the process.
I have a 2001 Toyota Tacoma SST. I haven't been stuck in the snow yet. I just maintain a constant speed, steer slowly and brake conservatively. It does great. It leaves most 4WD's in the dust (ditch). But, typically those owners experience over confidence and think the vehicle will do the work for them, instead of using their head.
Chances are that there is a rubber O ring stuck in the channel the filter seats into. Remove the filter, take a scribe or something like a scribe and make sure there isn't an old O ring stuck up there.
In order to remove a stuck transmission filter from a case sl series 2 backhoe consult with an individual at one of the auto shops. The owner's manual will also provide the information needed to make this repair.
Use a strap wrench around the base.
Remove the oil filter and then remove the extra o-ring that's STUCK up in the engine block were the filter seats against. It should ONLY have ONE O-RING and that will set on the top of the oil filter.
The automatic Toyota may be stuck in park because of transmission problems. The transmission may be jammed or stuck in that gear.
There should be a lock on the ignition a push button that you push and turn to remove the key
The oil filter housing is plastic and is usually easy to remove with the correct cap wrench. If you use other means to loosen it, then damage may occur. I would have a spare housing handy.