0
you need to pull the engine. Or if you are so inclined you can drop the tranny. Either way you need to get to the back of the engine and pull the starter plate off the crankshaft. Then remove the old seal and install a new one. When removing the old one just be careful not to scratch the surfaces on the crankshaft. You should be able to slide a pry bar under it ho and get it out. When reinstalling the new one lube it well as recommended. Jonathon
What else can I help you with?
Replace rear bulb Toyota 4Runner?
To replace the rear bulb in a Toyota 4Runner remove the plastic covers located in the trunk. Taking off the plastic covers will reveal the taillight housing and bulbs. Replace the bulbs.
How do you replace the rear speakers in the 1997 Nissan Altima?
You need to remove the rear seat, then remove the package tray.
99 Toyota 4runner replace rear speed sensor rotor on the axle?
remove the 10mm bolt and remove it.disconnect plug at other end.
99 Toyota 4runner replace rear axle bearings?
Remove the rear wheel from the axle. Remove the brake pads and hardware. Remove the axle end cap. Remove the bearing. Reverse the process to install the new bearing.
How do you remove the rear axle on a Toyota 4runner?
take the bolts out
How do you replace struts in 1997 Toyota 4Runner?
The 4Runner doesn't have struts; it has coil-over shocks in front. After removing the old shocks a spring compressor is required to remove the springs and install them on the new shocks. Take it to a front end shop that has the proper compressor and tools; it's very dangerous if you don't have good equipment and experience. The rear shocks are easy to replace by yourself.
How do you test and replace the fuel pump on a 1997 Toyota 4Runner if needed?
On some 4runners they are under the rear driver seat. Sorry that's all I have for you so far.
How do you replace rear speakers on a 1997 500sl Mercedes?
You have to remove the rear seats to be able to remove the rear side panels. Then you have to disconnect the wires to the speaker, unscrew the speaker, then reinstall the new one.
How do you replace the rear brakes on a 1997 Jeep Wrangler?
First, determine if they are disc or drum. If drum, remove the drum and replace the shoes. If they are disc, remove the caliper (and disc if necessary) replace the shoes and reassemble.
How do you replace rear speakers on 1990 Toyota 4runner?
Remove the rear interior panel. It will simply pull away with a little force. You will need to remove the Philips screw on the rear seat catch and the bolt on the rear seat belt first. It is also a good idea to remove the molding under the tailgate. The speaker will be located behind the built in grill. FYI, Toyota uses a power speaker with built in amplifier. Best to replace with same.
How do you replace rear wiper motor 1997 Ford Explorer?
how do you replace rear wiper motor on a 1997 ford explorer
How do you replace the rear dutch door latch on a 1997 gmc safari?
= How do you replace the rear dutch door latch on a 1997 gmc safari?" =
