First you open the hood then you unscrew the screws with a philips screwdriver take the old head light and get the model number get a new one place it in the same spot the old one was in and screw in the screws shut the hood and your good
Ryan smith
13
my dads a macanic
your welcome
To remove the headlight assembly from a 2004 Honda Pilot, first, open the hood and locate the screws securing the headlight assembly. Remove these screws, typically found at the top and side of the assembly. Next, gently pull the assembly forward to disconnect it from the clips, and unplug the electrical connector from the back. Finally, take out the assembly completely for replacement or repair.
with one of those thingys with the curved end at the top and a 25 inch screwdriver.
H4
No, you do not need to remove the whole headlight bracket to change the bulb on a 2012 Honda Pilot. Instead, you can access the bulb by opening the hood and removing the cover from the back of the headlight assembly. Once the cover is off, you can disconnect the bulb socket, replace the bulb, and reassemble everything.
The 2006 Honda Pilot has 4 headlight bulbs - 2 low beam and 2 high beam. See sources and related links below.
To change the headlight on a 1985 Honda Spree scooter remove the headlight housing. The scooter headlight will be mounting on the rear of the housing. Remove it and replace the bulb.
To change the assembly headlight on a Honda Pilot, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the assembly, then disconnect the electrical connector. Carefully pull out the old assembly and replace it with the new one, ensuring it fits securely. Reconnect the electrical connector and reattach any screws or bolts before closing the hood.
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
Probably a 50 watt halogen
no
It's programming which is present in the Body Control Module.
To remove the headlight from a Honda Del Sol, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Then, remove the screws or bolts securing the headlight assembly in place, usually found at the top and side. Finally, gently pull the headlight assembly out of the housing to complete the removal.