answersLogoWhite

0

I paid $5.00 from an on-line store for photos and instructions. It was pretty easy and only required a small flat blade and normal size Phillips screwdrivers. Start by removing the top tray insert (on top of the dash above the vents). Carefully insert the small flat blade into the left side near the bottom and prying it up. You wont scratch anything if you are careful. All components of the dash trim just snap in and out with clips. Pry up the other 3 corners once you have the first one loose. There is one Phillips screw under that cover. Next, you should be able to pull up (more out than up) on the two sides of the dash that extend down by the heater controls. The gray area just lifts off if you pull out and up. Again, the clips will allow it to just pop out. The entire radio will then be exposed, and there are 4 screws that hold it in. Once removed, you can unclip the radio (two wiriing harnesses and one antenna). Hope that helps

User Avatar

Wiki User

13y ago

What else can I help you with?