The skid plate does not have to be removed in order to access and change the filter.
You have to remove the skid plate, then you can change the oil and filter
In a 2006 Toyota Sequoia, the fuel filter is located inside the fuel tank as part of the fuel pump assembly. Unlike some older vehicles, this model does not have a separate, externally accessible fuel filter. If you need to replace it, you'll typically need to remove the fuel tank to access the fuel pump and filter assembly.
In a 2001 Toyota Sequoia, the cabin air filter is located behind the glove compartment. To access it, you'll need to open the glove box, remove any contents, and then unclip or detach the glove box to allow it to drop down. The filter is housed in a compartment that can be easily accessed once the glove box is out of the way.
To replace the air filter on a 2001 Toyota Sequoia, first, locate the air filter box, typically situated near the engine. Open the box by unclipping or unscrewing the fasteners, then remove the old air filter. Clean any debris from the air filter compartment, and insert the new filter, ensuring it fits snugly. Finally, close the air filter box and secure it with the clips or screws.
To replace the cabin air filter in a 2003 Toyota Sequoia, first locate the filter compartment, which is typically behind the glove box. Open the glove box and remove any contents, then gently press the sides to release it and lower it down. Remove the cover of the filter compartment by unfastening the clips, take out the old filter, and insert the new one, ensuring it’s oriented correctly. Finally, reassemble the compartment and glove box.
Push the brake pedal to released.
Remove transmission oil pan to access filter
yes, you have. And change new seal too.
On my 2003 4Runner and my 2008 Tundra it's directly behind the glove box. Remove the glove box and you will see a long narrow door. The filter is behind it. Instructions came with my new cabin filter when I bought it from a auto store. ($28) Yours may be in the same place.
The only tools need to remove the inside door panel on a Toyota Sequoia is a screwdriver. There are various crews that need to be taken out to remove the door panel. After the screws are out, the door panel comes off very easily.
It would help it you stated the particular model Toyota. In most Toyota's the filter is directly behind the glove box. You have to remove the bot to get to it or at least drop it all the way forward.
To replace the fuel filter on a 2004 Toyota Sequoia, first, relieve fuel system pressure by removing the fuel pump fuse and running the engine until it stalls. Next, locate the fuel filter, which is typically found along the frame rail or near the fuel tank. Disconnect the fuel lines from the filter using a wrench, and then remove the old filter. Install the new filter in the same orientation, reconnect the fuel lines, and restore the fuel pump fuse before starting the engine to check for leaks.