go to auto zone.com enter vehicle info.then look up starter,then click on repair guide and it will tell you.
remove neg.cable.then positive cable cable from starter,remove male to female wire ,then remove 2 bolts holding starter to engine.
Remove the positive battery cable from your 1988 Chevrolet 1500 pickup truck battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
disconnect neg. battery cable ,remove pos.cable from starter .10 or 12 mm wrench.remove wire from starter ,no wrench needed,its a male to female connector,remove 2 bolts holding starter to engine,12 or 14 mm wrench,thats it.
Disconnect the - battery cable Raise and support the vehicle Remove wiring at the top of starter Remove mounting bolts Remove starter
On a 1988 Nissan Pickup, the starter relay is typically located in the engine compartment, near the battery. It is often mounted on the inner fender or near the fuse box. To access it, you may need to remove the cover for the fuse box or look for a small rectangular relay that is labeled accordingly. Always consult the vehicle's service manual for specific details and diagrams.
no 84 and 85 swap out.
how to remove lock cyliner switch 1988 Isuzu pickup
The starter on a 1988 Nissan Stanza can be found on the inner side of the engine. It is between the gear box and the engine block.
On the bottom of the transmission one nut one bolt make sure you remove the battery cable.
36.5 psi
no they changed in 88.
4.5 qts.