0
What else can I help you with?
How do you remove manual gearbox from a 2004 Nissan Pulsar?
To remove the manual gearbox from a 2004 Nissan Pulsar, start by disconnecting the battery and draining the transmission fluid. Next, lift the vehicle and remove the wheels, followed by the driveshafts and any supporting brackets. Disconnect the clutch cable, shift linkage, and electrical connections, then unbolt the gearbox from the engine and carefully slide it out. Ensure to have assistance, as the gearbox can be heavy and awkward to handle.
Is 2004 Nissan Pulsar timing chain or timing belt?
It has a cam chain.
How do you replace the dash lights on a 2004 Nissan Quest van?
How do you replace the dash lights on a 2004 Nissan Quest
How do you change rear lights bulb globes in Nissan pulsar 2004?
To change the rear light bulb in a 2004 Nissan Pulsar, first, open the trunk and locate the access panel on the rear light assembly. Remove the screws or clips holding the panel in place, then carefully pull it away to expose the bulb holder. Twist the bulb holder counterclockwise to release it, replace the old bulb with a new one, and reassemble the components by reversing the steps. Make sure to test the new bulb before securing everything back in place.
What size rear speakers are in a 2004 Nissan Pulsar?
stock ones are 6 inch 40w clarions in the rear
Where is the Interior Lights Fuse on a 2004 Nissan Maxima?
They are tied to either the brake lights or the tail lights.
How do you remove the spare tire on a 2004 Nissan Frontier?
what is the part for lowering the spare tire on 2004 nissan frontier
What is the layout for the fuse box of a 2004 Nissan Pulsar?
The fuse box layout for a 2004 Nissan Pulsar is typically located under the dashboard on the driver's side and may also include a fuse box in the engine compartment. Each fuse is labeled with its specific function, such as lights, radio, or power windows. For the exact layout and fuse functions, it’s recommended to refer to the owner’s manual, which provides a detailed diagram and description of each fuse's purpose. If you don’t have the manual, many online resources and forums can provide this information as well.
How do you change the high mounted stop light globe on a 2004 Nissan Pulsar N16 sedan?
To change the high mounted stop light globe on a 2004 Nissan Pulsar N16 sedan, first, open the trunk and locate the high mounted stop light assembly. Carefully remove the assembly by unscrewing or unclipping it, depending on the design. Once the assembly is free, twist or pull out the old globe from its socket and replace it with a new one. Finally, reattach the assembly and ensure it is securely in place before closing the trunk.
What causes engine speed raising up than it used to after thermostat installation in an Nissan Pulsar 2004 sedan?
You may have a disconnected or broken vacuum line.
How do you remove the rear bumper cover on a 2004 Nissan Murano?
I have a small dent need to remove it
Where is the fuse for a 2004 Nissan Maxima tail lights?
The fuse for the tail lights in a 2004 Nissan Maxima is located in the fuse box, which is typically found under the dashboard on the driver's side. To access it, remove the cover of the fuse box and look for the fuse labeled "TAIL" or "TAIL LIGHTS" in the diagram on the inside of the cover. If the fuse is blown, it will need to be replaced with one of the same amperage. Always ensure the vehicle is turned off before inspecting or replacing fuses.
