Sorry for not being specific, but it's mostly short Phillips screws and plastic push pins that hold it on. I found from personal experience that the plastic push pins break and bend easily. Trashing these plastic pieces can cause problems like the plastic wheel well cover coming off while driving.
how you can remove the knock sensor from a 1996 Nissan pathfinder i need a picture
The front suspension housing and struts on a 1996 Pathfinder are severely corroded.
Remove the tire and wheel from your 1996 Toyota Tercel. Remove the end of the axle. Remove the wheel bearing seal. Remove the wheel bearing nut. Remove the wheel bearing. Reverse the process to install your new wheel bearings.
To replace the wiper control switch in the 1996 Honda Civic, you must remove the steering wheel. With the wheel out of the way , remove the column covers and disconnect the electrical harness from the wiper switch. Remove respective screws and slide replacement switch into place. Replace respective screws, column cover and steering wheel.
no
you have to remove the timing chain in order to remove the cam covers
The headlamps are an assembly, and the lenses/covers can not be removed.
You must remove the wheel because there are scews that hold it onto the inside of the wheel.
Remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing retaining nut. Remove the axle seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.
You will need to remove the covers from your 1996 Integra rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers.
The Pathfinder - 1996 TV is rated/received certificates of: Germany:6 USA:PG-13
Remove the wheel, remove the caliper, and the rotor will just come off.