* Disconnect the negative battery cable * At the bottom of the door panel remove the two screws * Pry up at the front edge of the power window switch pod and lift it out then unplug the electrical connector * Remove the inside door handle escutcheon * Remove the screw in the door pull pocket * Pull the door panel away from the door far enough to disconnect the electrical connectors then remove the door panel
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
take the door panels off, remove the housing for the Bose speakers, take apart the housing and cut the wires, put in a small speaker to replace the Bose full range speaker. (alternatively, replace the Bose housing with a custom mounting board) put the Bose housing back and the door panels back. cut the wires on the rear deck speakers and install a 6x9 speaker system. replace the CD player. (the original 2ohm Bose speakers burn out players designed for 4 or 8 ohm speaker systems)
Remove the door panels and replace the speakers. They sit in baskets and are simple to replace. We have instructions at our enthusiasts forum. www.trailvoy.com
remove the door panels
To replace the speakers in a 2003 Ford Thunderbird, start by removing the door panels or rear speaker covers, depending on which speakers you are replacing. Carefully detach any clips or screws holding the panels and disconnect the wiring harness from the old speakers. Install the new speakers by connecting them to the wiring harness, securing them in place, and then reattaching the door panels or covers. Finally, test the new speakers to ensure they are functioning properly before fully reassembling everything.
no they will not, you may be able to cut to fit.
For the front speakers your gonna have to take the door panels off to get to all the wiring and everything and for the back ones you should just be able to take the plastic cover off and replace them
You will need to remove the inner panels to gain access.
To replace the rear speakers on a 2001 Xterra, start by removing the plastic covers or panels that protect the speakers, typically found in the rear side compartments. Unscrew the existing speakers and carefully disconnect the wiring harness. Install the new speakers by connecting the wiring, securing them in place, and reattaching the covers or panels. Finally, test the new speakers to ensure they are functioning properly before finishing up.
To replace the rear speakers in a 1998 Dodge Durango, first, remove the rear door panels by unscrewing any visible screws and carefully prying off the panel clips. Once the panel is removed, disconnect the wiring harness from the old speakers. Then, unscrew the old speakers and replace them with the new ones, reconnecting the wiring harness. Finally, reattach the door panels securely.
Unscrew door handles in front first then just pull off door panels carefully unscrew speakers and replace with new.