0
remove the black plastic cover over the intake manifold (3 bolts-2 right side,1 left side) before going any further get a can of liquid wrench (wd40 will work) and spray the large nut connecting the pipe to the back of the egr valve. you might have to move a couple hoses back out of the way. unplug the vacum hose from the top. unscrew the nut from the egr valve, then remove the front bolt on the egr valve, then remove the nut that holds the hose bracket. gently tap the egr valve or pull it toward the front. reinstall vice versa.
What else can I help you with?
How do you replace an EGR valve on a 2000 Dodge Stratus 2.4 engine?
Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.
How to change egr valve 2000 Nissan maxima?
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
Where is the egr valve located on a 2000 Ford Explorer?
Where is the EGR valve located on a 2000 Ford Explorer
How do I remove and clean the EGR Valve on a 1997 Geo Prism 1.6L 4cyl?
Remove the EGR valve vacuum lines. Remove the EGR valve retaining screws. Wash the EGR valve in hot water. Allow the valve to thoroughly dry before installing it.
Does 2000 Hyundai tiburon have egr valve?
does a Hyundai tiburon have a egr valve
Where is the egr sensor on Ford Expedition 2000?
= EGR Valve = 4.2L, 4.6L, 5.4L and 6.8L Engines 1. Disconnect the negative battery cable. 2. Remove the vacuum hose from the EGR valve. 3. On the 4.6L engine, remove the nut and brake booster bracket. 4. On the 5.4L engine, remove the DPFE sensor retaining nuts and place the sensor to the side to allow access to the EGR tube. 5. Disconnect the EGR valve-to-exhaust manifold tube from the EGR valve. 6. Remove the EGR valve mounting bolts, then separate the valve from the intake manifold. 7. Remove and discard the old EGR valve gasket, and clean the gasket mating surfaces on the valve and the intake manifold. To Install: 8. Install the EGR valve, along with a new gasket, on the manifold, then install and tighten the mounting bolts. 9. Connect the EGR valve-to-exhaust manifold tube to the valve, then tighten the tube nut to 25-35 lbs. (34-47 Nm). 10. Connect the vacuum hose to the EGR valve. 11. On the 5.7L engine, install the DPFE sensor. 12. On the 4.6L engine install the brake booster bracket and the retaining nut. 13. Connect the negative battery cable.
How do you replace an egr valve sensor on a 1998 Ford Expedition?
To replace the EGR valve sensor on a 1998 Ford Expedition, first, disconnect the negative battery terminal to ensure safety. Locate the EGR valve sensor, which is typically mounted on or near the EGR valve itself. Remove the electrical connector and any mounting bolts, then take out the old sensor. Install the new sensor by reversing the process, ensuring all connections are secure, and reconnect the battery.
Where is the egr on a 2000 expedition?
where'sthe egr flow on a 2000 ford expedetion {code; P0401
Where is the egr valve located on a 2000 Honda CR-V?
There is no EGR valve on a 2000 Honda CR-V. The emission system used in these vehicles did not require an EGR.
How do you change the egr valve on a 1999 maxima?
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
How do you replace egr valve in a 2000 Mercedes e320?
To replace the EGR valve in a 2000 Mercedes E320, first, disconnect the battery and remove any surrounding components for access, including the engine cover and intake hoses. Unplug the electrical connector and remove the bolts securing the EGR valve to the engine. Clean the mounting surface, install the new EGR valve with a new gasket, and reassemble all components. Finally, reconnect the battery and check for proper operation.
How do you replace the EGR valve on a 1997 maxima?
* Remove the air intake duct from the throttle body and air filter housing * Detach the vacuum line from the EGR valve.Disconnect the EGR pipe nut * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * With a wire wheel buff the exhaust deposits from the EGR valve mounting surface on the manifold
