0
the folding tray OS bolted to the passenger seat. the passenger seat must be removed in order to unbolt the tray from the seat.
Do not remove the passenger seat. remove the cover that attached to metal bracket of p. seat. it's mounted with two plastic screws. use flat screw driver to remove. then you will see 3 bolts on the bracket attached to p. seat. remove bolts and pull away.
What else can I help you with?
Where is the obd-ii plug for the 1996 Honda accord lx?
Remove the ash tray
How do you remove the 2008 Toyota Sienna front seat folding tray table?
The tray bolts to the driver's seat. While the Tray is up, pop off the plastic part on the Driver seat that covers the covers up where the tray arm mounts to the driver's seat. Unbolt the two bolts securing the tray arm to the seat. Remove the tray, replace bols and cover.
What companies sell a folding tray table?
You can log on to the website www.officedepot.com or you may also visit www.houzz.com where you can purchase the folding tray table with low prices and varieties to choose from
Where is the scan tool plug in on a 96 Honda accord?
Behind the ash tray, just remove it, it should come off
How do you remove utility tray on 2011 Honda odyssey?
Here's the Utility Tray removal process: Pull the tray out as far as it will go. On the left and right side of the tray (between the tray and the enclosure) there are two projecting rails that the tray slides on. Beneath each rail there is a white nylon pad (at the back of the tray) that comes to rest against a projecting piece of black plastic (a "stop") that prevents the tray from sliding completely out. With GENTLE pressure pulling on the tray, slide a narrow flat blade screwdriver between the black "stop" and the tray. Rest the blade of the screwdriver against the white nylon pad and GENTLY push the stop away from the tray until the white nylon pad slides just past the projection. You will have to allow the screwdriver to move with the tray. Continue to GENTLY hold the tray open so the nylon pad does not slip back behind the stop and repeat the process on the other side of the tray. You will need good lighting and will probably have to remove the console to have access and see what you are doing. To replace the tray, first remove the obstructions from the enclosure, and then align the slide rails with the receiving slots on the enclosure; gently pushing the tray back into poisiton. Remember, anything 1/2 thick or less can slide over the back of the tray and into the tray enclosure, so don't overload the tray. Good luck and thanks to Honda for making this an unnecessarily complex process - east to install but difficult to remove for service. Hopefully they redisigned the tray so things can't slip over the back or sides. It took longeer to type this than to remove the tray.
Where can one buy folding tray tables?
There are many places one might go to purchase folding tray tables. In addition to an official brand website, one might also try purchasing from the Amazon website.
How do you remove the dashboard in a 92 Honda Accord to install a stereo?
remove the cup holder and ashtray assemly ther are two small screws facing upwards remove them and it will come out There're more! Unplug the light of the trash tray, remove tray. Loosen two upward BOLTs at the back. Draw the stereo partially, then fully remove the bolts with hand. Afterwards, remove the stereo.
In what store could you find TV tray tables?
You can find TV tray tables for sale from stores such as Target and Walmart. You can also find them available online from major retailers such as Amazon.
How do you remove a factory car stereo from a 1994 Honda Accord EXi?
Take out the ash tray and unscrew the screw back there that holds the kit in place.
How do I remove the drip tray from the fridge?
To remove the drip tray from the fridge, locate the tray at the bottom of the fridge and gently slide it out. Empty the tray and clean it as needed before sliding it back into place.
What is Folding side tray?
A folding side tray is a small, collapsible platform that can be attached to the side of a chair or table to provide extra space for holding items such as drinks, snacks, or electronic devices. It is convenient for use in various settings, such as camping, picnics, or while relaxing outdoors.
How can I make a TV tray?
To make a TV tray, you will need to gather materials such as wood, screws, and a folding table leg mechanism. Cut the wood to the desired size for the tray and attach the folding table leg mechanism to the underside. Secure the screws to hold everything in place. Sand down any rough edges and finish with a coat of paint or varnish for a polished look.
