On my 92 the pump was on the top of the tank. I therefore had to remove the gas tank to get to it. Unhook the battery. Then disconnect the hoses you can get to. Place jacks under the tank and let them put pressure on the tank. Then remove the straps holding the tank up. Begin lowering the tank and then unhook any hoses you didn't do earlier. Once on the ground you can slide it out and then replace the pump. Empty the tank prior to installing to make it easier. Just be careful. When doing anything with gas you want to ensure it wont ignite by any flame. it might be helpful to also raise the car if necessary.
How do I remove a windshield washer pump from a toyota 4-runner 1988?
You need to drop the fuel tank. Also you need to remove the hoses that go from the fill port to the tank.
in the fuel tank
Mounted inside and on top of the fuel tank.
ronnie4@cox.net
Your 2001 Toyota 4 runner will not start even after changing the VSV and fuel pump because of another mechanical problem. Consider taking it to a mechanic.
$359 THATS CHEAP
Yes
Unless there is an acess panel above the fuel pump you will have to remove the fuel tank in order to gain access to the pump.
To change the fuel pump on a 1998 Toyota 4Runner, first disconnect the negative battery terminal and relieve fuel system pressure by removing the fuel cap and using a fuel pressure gauge. Next, access the fuel pump by removing the rear seat and the access panel on the floor. Disconnect the electrical connectors and fuel lines, then unbolt and remove the old pump from the fuel tank. Install the new pump in reverse order, ensuring all connections are secure before reassembling and testing the system.
The fuel pump is in the gas tank. You will need to remove the body to access the tank.
you put cat litter on it