The rear speakers in a Toyota solara convertible, you must first remove the existing speakers by removing the cusions from the back of the seats and then accessing the main wire panel to discconect them.
www.solaraguy.com Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.
I believe the Solara is the same as the Camry. You have to remove part of the center console to access the adjustment.
Begin by removing the speaker covers in your 2006 Toyota. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
Depends on the model year. Also, are you trying to remove the dash with the instrument cluster, or the center console with the HVAC and radio?
To remove the headlamp assembly on a 2000 Toyota Solara, start by opening the hood and locating the headlamp assembly. Remove the screws or bolts securing the assembly, typically found on the top and side of the unit. Disconnect the electrical connectors and gently pull the headlamp assembly out of its housing. Be cautious not to damage any clips or wiring during the process.
Open the trunk; Remove the trunk liner; Remove the bulbs/wiring; locate the bolts securing the tail light assembly to the body; Remove the nuts; lift the assembly away. Cheers
To change the dash lights on a 2000 Toyota Solara, first disconnect the negative battery terminal to ensure safety. Remove the instrument cluster by unscrewing the screws that secure it, then gently pull it out. Locate the burnt-out bulbs, twist them counterclockwise to remove, and replace them with new bulbs. Reassemble the cluster, secure it back in place, and reconnect the battery.
It's directly behind the glove compartment. Remove the glovebox door and you'll see the amp on the right. Cheers
You cannot turn them, at leas not officially. The work around is to remove running light relay.
The 1999 Toyota does not have rear struts. The automobile has rear shocks. Remove the retaining bolts from each end of the shock. Reverse the process to install the new shock.
The 1999 Toyota does not have rear struts. The automobile has rear shocks. Remove the retaining bolts from each end of the shock. Reverse the process to install the new shock.