To remove the spare wheel from a Nissan Civilian bus, first, locate the spare wheel compartment, typically found underneath the rear of the vehicle. Use the appropriate tools, such as a wrench or a jack, to lower the spare wheel from its mount. Ensure you follow safety precautions by securing the vehicle and using gloves if necessary. Once lowered, you can detach the wheel from the mounting mechanism.
The spare wheel is secured with a cirular plate which has a bolt through it that secures the spare wheel from moving mine WA missing when i got mine i picked one up in a breakers hope this helps
To remove the spare wheel on a Citroen Xsara Picasso, first, locate the spare wheel compartment, usually found under the boot floor. Use the appropriate tool, typically a wheel brace or a spanner, to loosen the bolt securing the spare wheel in place. Once the bolt is removed, lift the spare wheel out of the compartment. Make sure to securely stow any tools or components after the wheel is removed.
Under the spare wheel? if not then you might not of got one.
To remove the spare wheel from a Peugeot 307, first, locate the spare wheel compartment, usually found in the trunk under the floor panel. Lift the panel and use the provided tools to loosen the securing bolt or clamp that holds the spare wheel in place. Once it's loose, carefully lift the spare wheel out of the compartment. Finally, ensure everything is securely placed back in the trunk before closing it.
I have a Chevy Blazer 2000 4 Wheel Drive ZR2 The Spare Is On The Back With a Lock How do I remove the Spare Tire Thank You
wd40, from experience, sounds stupid but it works!
The tool kit and the jack for the Porsche Boxster are located in the front luggage compartment behind the spare wheel. You must remove the spare wheel to get to it.
remove s.w.cover ,remove bolt,use s. w.remover
Behind the rear nearside passenger seat there should be a tool kit, the kit contains wheel brace etc and 3 rods and a handle. Connect the rods together, and you should have a security key that fits on the end of the rods.At the rear of the truck, at the top of the bumper (slightly off centre) you will see a hole, feed the rods (security key first) into the hole and guide it into the spare wheel lowering mechanism. Fit the handle onto the rods and turn, if the security key is located properly, the spare will start to lower, it's on a chain, lower until the wheel is laying flat, keep turning to slacken the chain, remove the chain and grab the spare.To replace spare, reverse above procedure.Note: Later Navs don't have a security key for the spare, as Nissan feel the steel spare wheel isn't worth nicking?
i front or rear.
To remove the spare wheel from a Citroën C2, first, locate the spare wheel compartment, typically found in the boot (trunk) under the floor mat. Use the provided tool to unscrew the retaining bolt or clamp that holds the spare wheel in place. Once the bolt is removed, lift the spare wheel out of the compartment. Ensure you securely store the tools back in their designated place after use.
Two rubber clip either side of wheel then twist cover and pull