To remove the speedometer from a Toyota Cressida, first, disconnect the negative battery cable to ensure safety. Then, remove the dashboard trim by unscrewing any screws and gently prying it off. Next, detach the speedometer cable from the back of the speedometer and unscrew the speedometer itself from the instrument cluster. Carefully pull it out, ensuring that any connectors or wires are also disconnected.
Remove the dashboard cover. Remove the retaining ring, from the speedometer. Remove the speedometer cable from the back of the speedometer. Reverse the process to install the new speedometer.
1980 corvette , how to remove speedometer
Remove the dash panel cover. Remove the speedometer retaining ring. Remove the cable from the back of the speedometer. Reverse the process to install the new speedometer.
Yes, it is possible for the speedometer drive in the gearbox of a Toyota Cressida to be out of position. This misalignment can occur due to improper installation, wear and tear, or damage to the gearbox. If the speedometer is not functioning correctly, it may be necessary to inspect and realign or replace the speedometer drive gear to ensure accurate speed readings. Always consult a professional mechanic if you're unsure about the issue.
You will need to remove the instrument panel cover. Remove the retaining screws from the speedometer. The lightbulb will be on the back of the speedometer.
To remove the speedometer from a 1974 Super Beetle, first, disconnect the negative battery cable for safety. Then, remove the dashboard cover and the screws securing the speedometer itself. Carefully disconnect the speedometer cable from the back of the speedometer, and then pull the speedometer out of the dashboard. Be sure to handle it gently to avoid damaging any components.
Yes
remove cable from the transmission and remove the cable from the back of the speedometer up under the dash and then the complete cable can be pulled out.
To remove the speedometer from a 1987 Mercedes 190E, first, disconnect the negative battery terminal for safety. Next, carefully remove the instrument cluster by unscrewing any retaining screws and gently pulling it away from the dashboard. Disconnect the speedometer cable from the back of the speedometer and any electrical connectors. Finally, remove the speedometer from the cluster by unscrewing it from its housing.
U HAVE TO REMOVE THE SPEEDOMETER FACE PLATE, AND REMOVE THE SPEEDOMETER AND THERE ARE ALL THE LIGHTS ON THE BACK PART OF THE SPEEDOMETER, PD:BE CAREFULL WHEN REMOVING THE SPEEDOMETER THERE IS A SPPEDO CABLE UNDER NEED U HAVE TO DISCONECT THE CABLE FROM BEHIND.
To remove the speedometer from a 727 Mopar transmission, first, disconnect the speedometer cable from the transmission by unscrewing the retaining nut. Next, remove the speedometer gear assembly by unbolting it from the transmission case. Be careful to avoid damaging the O-ring that seals the gear assembly. Once detached, you can replace or service the speedometer component as needed.
It has been awhile for me but I don't think you can remove it. The speedometer is a press fit and has to be pushed out from behind.