To replace the starter on an 1983 280ZX, first disconnect the negative battery terminal to ensure safety. Then, remove any components obstructing access to the starter, such as the air intake or exhaust heat shield. Unbolt the starter from its mounting location, disconnect the wiring harness, and then replace it with the new starter by reversing the removal steps. Finally, reconnect the battery and test the new starter to ensure it functions properly.
remove wires from the top of starter, remove the two bolts that attach starter to bell housing, pull starter off, reverse to put starter back on
there should be a switch on brake pedal
replace the starter
Power Window Circuit BreakerI have a '83 280ZX and am also having power window problems. I was told by our local Nissan dealer service center, there is no fuse or circuit breaker for the power windows. There is a relay switch in the driver's door. None of my windows will let up or down. The switch cost is around $200. I am not sure about the '83 280zx, however on my '82 280zx there was a circuit breaker located in the passenger kick panel. You should see two screws above the fuse box which will remove a black unit that has the circuit breaker bolted onto it.(Just to verify) I also have a '83 280zx and yes thecircuit breaker is also located on the passenger kick.
firewall passenger side just below the spark plugs
if you are talking about the black bars that go across it then they are called louvers
I need to replace the starter in a 2003 Tundra, but where is it the starter? I need to replace the starter in a 2003 Tundra, but where is it the starter?
AnswerI have a 83 with a I-6 and it gets great mpg. 35 and i have done nothing to it.
1-5-3-6-2-4. 1 being closest to the radiator
how to replace a starter
How do you replace a starter on 2003 powerstroke
How do you replace the starter on 2002 chevy avalanch