unclip big black box (beside the battery) and remove old air filter.
Is this an RX? If so, replace your mass air flow sensor located on the top of you Air filter housing. Do yourself a favor, and replace it with a Lexus replacement part.
How do you change air filter on 2010 RX 350
The engine air filter on a 2010 Lexus RX 350 is located in the engine compartment, specifically in a rectangular housing near the rear of the engine bay, close to the windshield. To access it, you typically need to remove the cover that secures the air filter housing. This is usually done by unclipping or unscrewing a few fasteners. Once open, you can easily replace the air filter.
open the glove compartment ,you see a cover,take that off you see the cabin filter,then pull the cabin filter towards you. vice versa instaling it
How to replace the tire pressure valve on lexus rx 350?
To change the air filter in a Lexus RX 350, first, locate the air filter housing, which is typically found near the engine. Open the housing by unclipping or unscrewing it, then carefully remove the old air filter. Clean any debris from the housing, insert the new air filter making sure it fits securely, and reassemble the housing. Finally, close and secure it, ensuring everything is tightly sealed before starting the engine.
Open the glove box. Remove the rectangular black plastic acess panel. Pull the filter out.
easy
The mass air flow (MAF) sensor on a 2000 Lexus RX 300 is located in the air intake system, specifically between the air filter and the throttle body. It is typically housed in a plastic or metal housing and has an electrical connector attached to it. To access it, you'll need to remove the air intake duct that connects to the air filter. Always ensure the engine is off and cool before attempting any maintenance.
Lexus RX was created in 1998.
The mass air flow sensor is located on top of the air filter housing and is held in place by two screws. There is an electrical connector plugged into the sensor.
it run out of frion.