Check out http://www.acuravigorclub.com for answers to many Vigor maintenance questions. For an indepth step-by-step answer to changeing the timing belt on a Vigor refer to http://pw1.netcom.com/~gentile/Vigor/Timely0702.htm. Hope this helps, OBrown
45---------------Fuel Metering.
how to replace rear shocks on a 1994 acura legend coupe
On a 1994 Acura Vigor, the fuel filter is located under the car, near the fuel tank. Specifically, it can be found along the frame rail on the driver's side. To access it, you may need to raise the vehicle and remove any protective covers. Always ensure the fuel system is depressurized before attempting to replace the filter.
I have the same question, who can help? Thank you very much.
The power steering belt has an adjustment pulley. To tighten the belt on a 1994 Acura Vigor loosen the adjustment pulley and pull it up higher than tighten it.
The Acura Vigor was released between 1992 and 1994. You can probably find one for sale on Craigslist. Finding one at a used car lot would be unusual because of how old the car is.
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
The firing order for the 1994 Acura Vigor, which features a 2.5L inline-5 engine, is 1-2-3-4-5. This means the cylinders fire in that specific sequence, starting from cylinder 1. The cylinder layout typically follows a front-to-back arrangement, with cylinder 1 at the front of the engine. When working on ignition timing or spark plug replacement, it's essential to follow this order for proper engine performance.
They are just vent hoses for the distributor and they hide under the fuel rail cover.
replacing headlights on a acura legend 1995
The 1993 Acura Legend has a timing belt. For 1991-1994 model years, the manufacturer recommends that the belt be replaced every 90,000 miles or 72 months.
How do you replace the timing chain on a 1994 mercury grand marquis