To replace the tail light lens on a 2008 Toyota Highlander, start by opening the rear hatch and removing the screws or bolts securing the tail light assembly. Carefully pull the assembly away from the vehicle and disconnect the wiring harness. Replace the old lens with the new one, reconnect the harness, and reattach the assembly with the screws or bolts. Finally, test the tail light to ensure it’s functioning properly.
Question isn't clear. Are you asking how do you replace the bulb -OR- how to remove the entire lens assembly?
Because the Toyota Highlander is a Japanese car.
Depends on the year. On the 2002 there is a removable plastic door in the rear cargo area. The tailights are easily accessible and twist out easily.
The tail light fuse for a 2004 Toyota Highlander is located in the fuse box under the dashboard on the driver's side. To access it, remove the cover of the fuse box and look for the fuse labeled "TAIL" or "TAIL LIGHT." If the fuse is blown, replacing it should restore functionality to the tail lights. Always consult the owner's manual for specific fuse locations and ratings.
2003 Toyota Highlander tail light bulb lamp replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Replace the light bulb. Tail lights are usually dual filament, 2 filaments in one bulb.
with alot of expirience :)
If it's just a bulb replacement, Open the tailgate look inside panel there should be torqs screws remove thelm. the entire tail light assy. comes out, replace the bad bulb and reinstall assy.
eassy pull the fuse box cover off turn it over located the tail light fuse pull it out replace with same amp fuse
How do you change the tail light on a 2001 toyota sequoia
In order to replace the rear window tail light you need to get into the truck. Once inside the trunk look to the top of the trunk and look at where the screws are for the rear tail light. Unscrew them and the entire housing for the light will pop off.