I am not positive but I believe there is a recall on the door locks check with your dealer
power door or manual
To change the left rear door handle on a 2003 Honda Element, first, remove the interior door panel by unscrewing any visible screws and carefully prying it away from the door frame. Next, disconnect the door lock rod and any electrical connections attached to the handle. Remove the bolts securing the door handle to the door, then replace it with the new handle and reassemble the door panel, ensuring everything is securely reattached. Finally, test the handle to ensure it functions properly before closing the door.
How to replace left front door actuator on a 2005 honda accord hybrid
There is a plastic trim/door, under/behind the glove box, filter slides in /out.
To replace the fuel door assembly on a Honda Element, first, ensure the vehicle is off and the fuel door is empty. Remove the interior panel covering the fuel door hinge by unscrewing or unclipping it. Disconnect the fuel door release cable and detach the old assembly by removing any screws or clips holding it in place. Install the new fuel door assembly by reversing the steps, ensuring the cable is properly connected and the panel is securely reattached.
How do you replace the side sliding door rollers on a 2000 Honda Oydessy van?
Type your answer here... How to Replace a Lock Actuator | eHow.com go to eHow.com and type in Replace Honda pilot door Lock Actuator replacement
em2
take off the door, disconnect the electrical wires, and pop off a lot of plastic mount screw and basically strip oit down. Then remove the whole handle and with any luck, yours will come off after 3 hrs of work....like mine did today!
Yes
Removing the door panel on a 2003 Honda Civic require locating all the mounting hardware. There are a few screws placed on the door, once removed the rest of the door panel needs to be un-clipped. The panel will then come off.
To remove the door panel from a 2003 Honda Pilot all the mounting screws must be found and removed. There will be 2 screws and 8 clips holding the panel to the door. After removing the screws the door panel will be able to be pulled off.