I am currently replacing my one. You will need a phillips screwdriver to remove the panel below the steering column. There is a rubber grommet around the ignition switch that tries to hold the panel from pulling down. Simply pull it out, it is easy to put back in. Once you pull the cover down you will see the relay markedBL-10Z DOT to the right and slightly below the rear of the ignition/ steering lock mechanism. Grasp the sides with thumb and forefinger to release the locking thingies and pull it out. Well I'm off to go buy a replacement so the rest is up to you : )
how to replace the flasher relay on a hyundai accent 1999
It is quite simple to replace the flasher relay switch on your 2001 Kia. The flasher relay switch simply plugs in and out.
To change the flasher relay on a 2003 Hyundai Tiburon, first, locate the relay, which is typically found in the fuse box under the dashboard on the driver's side. Remove the fuse box cover and identify the flasher relay, which may be labeled. Gently pull the old relay out and replace it with a new one, ensuring it is securely seated. Finally, test the turn signals to confirm that the new relay is functioning properly.
Replace the Flasher Relay.
If neither side works, the Flasher Relay is defective. Replace it.If neither side works, the Flasher Relay is defective. Replace it.
Behind the fuse box
I would suspect the Flasher Relay is defective. Replace it with a new one.I would suspect the Flasher Relay is defective. Replace it with a new one.
relay box (fuse box under hood)
replace your flasher relay
The 2001 Monte Carlo emergency flasher relay switch and the turn signal flasher relay switch are the same. The flasher relay switch simply plugs in and out.
The turn signal flasher relay switch can be found beneath the drivers side dashboard. The turn signal flasher relay switch will be to the left of the brake pedal.
The Relay is in a hard to reach place under the dash, along with the fuel pump relay and some others.