Remove the manifold and change the gasket. And voila!!!
To replace the transmission gasket in a 1990 Geo Tracker, begin by safely lifting the vehicle and securing it on jack stands. Drain the transmission fluid by removing the drain plug or pan, then remove the transmission pan by unscrewing the bolts. Clean the mating surfaces, replace the old gasket with a new one, and reattach the pan with a proper torque on the bolts. Finally, refill the transmission with new fluid and check for leaks.
Replacing the head gasket on any vehicle is a long and complicated process, however if you wish to see basic step-by-step instructions go to the related question on the right side of the page "How do you replace a head gasket?"
No
Replace it , meaning the cracked head or the gasket . Neither can be repaired . The head can be repaired if its only warped from overheating by having it surfaced . It is best on the 8 valve or the 16 valve engines to replace with new parts.
you replace it
It is on the intake manifold closes to the TBI, it will be the black one.
i have 1995 4x4 geo tracker with a bad auto transmission will a auto transmission out 1998 4x4 geo tracker fit in 1995
does 1990 geo tracker have air bags
To change the voltage regulator on a 94 Geo Tracker, locate it in the black plastic box on the back of the alternator. Unplug each cable from the regulator, remove it and replace.
How do you add refridgerant to a 1997 Geo Tracker?
i have a 97 geo tracker and get 32 miles to the gallon
You need to get the rotor off to replace studs with new ones.