how do i replace a wheel seal
Remove the tire and wheel from your 1996 Toyota Tercel. Remove the end of the axle. Remove the wheel bearing seal. Remove the wheel bearing nut. Remove the wheel bearing. Reverse the process to install your new wheel bearings.
Is the wheel bearing on the front or the rear ????.. There is a big difference ...
no
not easily or quietly
$250 Labor plus $350 Bearing at Toyota Dealer
Remove the tire and wheel from your 1989 Toyota Corolla. Remove the end of the axle. Remove the axle seal. Remove the wheel bearing. Reverse the process to install your new wheel bearing.
The rear wheel bearing torque specification for a 1995 Toyota Tercel is typically around 55 ft-lbs (75 Nm). It's important to use a torque wrench to ensure proper tightening, as over-tightening can damage the bearing. Always refer to the vehicle's service manual for the most accurate and detailed specifications.
the bearing is one non-dissasemblable unit, it has to be pressed out and in. best done by someone who has the right tools.
The 1996 Toyota Tercel brake cable runs from the emergency brake lever to the rear wheel. The emergency brake is on the passenger side rear wheel.
no need to replace wheel bearing unless the wheel bearing is worn out
The cost to replace the wheel bearing on one side in the front of a 1996 Toyota Corolla will cost approximately $316 to $403 for labor. The cost for the parts are estimated to be $77 to $105.
How do I put a wheel bearing on with out a wheel bearing press