peel off carpeting behind the tail light from the trunk. there should be bulb holders- pull out the holder that holds the busted bulb. you can do this by slightly turning it and pulling it out. change the bulb and replace the holder the same way you removed it.
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
See sources and related links below for the 2002 Mitsubishi Lancer headlight bulb info.
Phone your local Mitsubishi dealer
shogun side light bulb
afshar13@yahoo.com
According to my information, there was no 2001 Mitsubishi Lancer. The general answer is to consult your owner's manual first for replacement procedure. Once you identify the correct year and/or correct model of the vehicle, see sources and related links below for more bulb information.
h4 60/55watts
It will vary depending on year of vehicle which was not provided. Mitsubishi Lancer tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
how do you replace head light blubs l300 panel van
2004 Mitsubishi Lancer tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
how to replace bulbs on a 2009 mitsubishi eclipse
To change the headlight bulb on a Mitsubishi Lancer, first, open the hood and locate the back of the headlight assembly. Disconnect the power connector by gently pulling it off, then remove the dust cover if present. Unscrew or unclip the old bulb from the socket, being careful not to touch the glass part of the new bulb. Insert the new bulb, secure it in place, reattach the dust cover, and reconnect the power connector before testing the light.