You have to remove the door panel and the triangle piece of plastic covering mirror mounting nuts from inside. Also you will have to partially pill out the plastic protection which is behind the plastic door panel. It's necessary in order to get access to the mirror harness. Remove nuts, be careful not to drop down the mirror, disconnect the harness. Connect a new mirror using the harness. After that install holding nuts and tighten them. Installation is reversal to disassembly.
PS: don't forget to disconnect the negative wire from the battery before you start working.
The 1998 Camry did not have a serpentine belt. Do you have a 1998 Corolla?
how to install replace air intake hose toyota camry 1998
Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. Installation is the reverse of removal.
How_do_you_remove_the_door_panel_on_a_1999_toyota_camry
To replace the driver's side mirror on a 1998 Subaru Legacy, start by removing the door panel. First, unscrew any visible screws and gently pry off clips to detach the panel. Once the panel is off, disconnect the wiring harness for the mirror. Remove the three bolts securing the mirror to the door, replace it with the new mirror, and reassemble the door panel by reversing the steps.
How difficult is it ro replace the trunk cable in a 1998 camry? The trunk is stuck shut and I was told the cable snapped. Thanks!
Replace the bulb that is burnt out.
How_much_should_it_cost_to_replace_a_1996_oil_pan_gasket
how much does it cost to replace the timing belt in a 1998 Toyota sienna.
The color code is on the sticker which as attached to the of the car from driver's side.
There is a switch on the transmission stick facing the driver's side.
follow the top radiator hose to the intake. it should be there.