0
disconnect you're battery first ,remove glove box. locate your blower motor and disconnect your wiring harness from it ,next remove the computer on the right side of the blower box. ,then remove the three screws and one 10mm nut and pull the entire blower assembly out. there is a hidden screw up top behind a piece of duct work. next remove the eight Phillips head screws to remove the cover on the heater box. now you will be able to pull out the evaporator core if you have disconnected the ac line from under the hood where it goes thru the fire wall.
What else can I help you with?
How do you replace the water pump on a 1994 Toyota Camry?
Answering "How do you replace the water pump on a 1994 Toyota Camry?"
Where is the schrader valve on a 1994 Toyota Camry?
Check near the tires.
Removing the expansion valve on a 1994 Toyota Paseo?
To remove the expansion valve on a 1994 Toyota Paseo, first ensure the air conditioning system is fully evacuated to prevent refrigerant release. Then, disconnect the necessary components, including the refrigerant lines and electrical connections. Afterward, unbolt the expansion valve from its mounting location and carefully pull it out. Finally, replace it with a new valve, reassemble the components, and recharge the A/C system.
What is the firing order for a 1994 Toyota Camry 2200 16 valve?
1342
How do you change the EGR valve on a 1994 Toyota Camry?
The egr valve is located on the top rear of the engine. It bolts on and is easily removed.
How do the expansion valve perform its duty on 1994 Toyota Camry?
It meters liquid high pressure refrigerant into the evaporator which is located in the heater housing under the dash. It controls refrigerant flow to keep the evaporator coil from icing up.
Where is the expansion valve on my 1994 Toyota Camry?
The expansion valve is located inside the evaporator core housing on the evaporator core. If you see the large and small pipes coming through the firewall on the passenger side of the engine compartment and trace them into the plastic box behind the glove box, you will find the evaporator core inside this box and the expansion valve is the little aluminum block that is in between those pipes and the evaporator core. It should have a little quarter- like bell on the rear of it. Hope this helps and is in time.
How do you Install an Expansion valve on a 1994 Toyota Land Cruiser?
To install an expansion valve on a 1994 Toyota Land Cruiser, first, ensure the A/C system is fully discharged. Remove the A/C lines connected to the old expansion valve, then detach the valve itself from its mounting location. Install the new expansion valve by securing it in place and reattaching the A/C lines, ensuring all connections are tight to prevent leaks. Finally, recharge the A/C system and check for proper operation.
Where is the orifice tube in a 1993 Ford Escort?
Where is the A/C expansion valve on the 1994 Lexus Es300
How do you replace the idle air control valve in a 1994 Chevy Corvette?
== ==
How do you test 1994 Toyota Camry igniter?
Replace it with a know good one, if that fixes your problem then its the igniter.
How do you replace headlight bulb on a 1994 Toyota Camry?
Try this link: http://wiki.answers.com/Q/How_do_you_replace_the_headlight_bulb_located_on_a_1994_Toyota_Camry
