Jack up the 2002 Optima and remove the wheel. disconnect the caliper brake line and drain into a bucket. Unbolt the caliper, and remove it with the pads. Bolt the new caliper on and replace the pads. The brakes may be spongy and the new caliper will require bleeding.
The 2002 Kia Optima has 39 in. of front head room.
The 2002 Kia Optima has 55.8 in. of front hip room.
The 2002 Kia Optima has 43.3 in. of front leg room.
The front track of the 2002 Kia Optima is 5 ft. 0.6 in. (60.6 in.).
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
The 2002 Kia Optima has front wheel drive.
To replace the front brake pads on a 2002 Jaguar X-Type, first, lift the car and remove the front wheels for access. Next, locate the brake caliper and remove the caliper bolts to slide the caliper off the rotor. Remove the old brake pads and compress the caliper piston using a brake tool. Finally, install the new pads, reattach the caliper, and ensure everything is secure before replacing the wheels and lowering the car.
To replace the front brake pads on a 2002 Ford Expedition, first, lift the vehicle and remove the front wheels. Then, locate the brake caliper, unbolt it, and carefully slide it off the brake rotor. Remove the old brake pads from the caliper bracket and compress the caliper piston using a C-clamp or brake tool before installing the new pads. Reassemble the caliper, ensuring everything is properly secured, and then reattach the wheels and lower the vehicle.
To replace the front brake pads on a 2002 Volvo S80, first, lift the vehicle and remove the front wheels. Next, detach the caliper by removing the caliper bolts, then carefully slide the caliper off the rotor. Remove the old brake pads and install the new ones, ensuring they are properly aligned. Finally, reattach the caliper, replace the wheels, and lower the vehicle, making sure to pump the brake pedal to seat the new pads before driving.
$450-850
To replace the front brake pads on a 2002 GMC Denali, first, lift the vehicle and remove the front wheels for access. Then, remove the caliper bolts and slide the caliper off the rotor, taking care not to strain the brake line. Remove the old brake pads, then insert the new pads and compress the caliper piston using a C-clamp. Reassemble the caliper, reattach the wheels, and lower the vehicle before pumping the brake pedal to ensure the pads are seated correctly.
Remove caliper pins and REPLACE, remove caliper and housing bolts, clean all slide surfaces and tin clips, or replace; replace rotor, push caliper piston back to it's starting position, lubricate all touching surfaces except pad to rotor with hi temp caliper lube, reassemble, adjust rear brakes if they are drum.